New Webinar: The Neo Derm Effect: A Year of Revenue Growth

Tratamiento de acné agudo y crónico y cicatrices de acné, utilizando el láser Neo Nd:YAG de 650 microsegundos de 1064 nm

Dr. Godfrey Raj-Kumar, obstetra/ginecólogo, Trinidad y Tobago

A una paciente de piel tipo IV se le ofreció una primera consulta gratuita en la que se le dio una explicación detallada del tratamiento propuesto. Se utilizaron espejos faciales para identificar las lesiones activas o comedones y las cicatrices con hoyos resultantes de lesiones crónicas no tratadas. En su segunda consulta, completó voluntariamente el formulario de consentimiento informado para el uso del procedimiento con láser Nd:YAG 1064. Le limpiaron la cara con un hisopo con alcohol etílico. Se advirtió a la paciente del efecto de escozor muy localizado y potencialmente breve al aplicar la luz sobre la lesión aguda mediante una única pasada y una pasada triple sobre las lesiones crónicas con hoyos. Se le ofreció la aplicación local de EMLA al 5 %, una crema anestésica local y/o un spray de cloruro de etilo en cada lesión. Este último es opcional dependiendo del umbral de dolor del paciente y solo se aplica inmediatamente antes del paso del pulso a la lesión individual, según la respuesta del paciente tras el tratamiento de las primeras lesiones. Las lesiones agudas del acné se trataron ajustando el láser a una fluencia de 159 J/cm2 en un tamaño de punto de 2 mm, un ancho de pulso de 0.6 ms y una sola pasada sobre cada lesión. Las lesiones crónicas se trataron con una fluencia de 21 J/cm2 en un punto de 6 mm, ancho de pulso de 0.6 ms y 3 pasadas sobre cada lesión. Las lesiones de acné activo solo se trataron en su primera consulta de tratamiento y luego se cambió el uso de anticonceptivos orales de Yasmin o Yaz a Diane 35. A la luz del hallazgo de dermatitis seborreica, se le pidió que usara Auroplus (ketokonazol al 4 %) de forma concomitante como champú una vez por semana y como un lavado facial muy diluido por la noche, dejándolo actuar durante la noche. Continuó el uso de estos, sin cesar. Solo recibió un tratamiento de las lesiones agudas en la primera consulta de tratamiento y las lesiones crónicas se trataron a intervalos de cuatro semanas a partir de entonces. Ha tenido tres tratamientos de las lesiones crónicas hasta la fecha y está satisfecha de que, ocho semanas desde su último tratamiento, no se requieran más.

Table of Contents

Laser Optical Engineer

Aerolase is the fastest growing medical laser company, serving the high growth dermatology and aesthetic laser market. Nestled in the picturesque Hudson Valley in Tarrytown, NY, the location is also ideal for access to NY City and other areas of the Northeast and Mid-Atlantic U.S. We are hiring in many areas and currently seek laser optical engineers with a passion for creating new things. The company offers a friendly, team-oriented work environment and competitive compensation including salary, bonus, stock options, 401k, and health/dental/life insurance plans.

About the Team:

  • We are a diverse team of friendly, creative hard-working people with a passion for achieving our objectives
  • We are creative, hands-on and innovative with a strong orientation toward high customer satisfaction
  • We have created a very team-spirited company culture and believe it is important to have open and effective cross-functional collaboration and communications – and enjoy our work!

About the Role:

We’re looking for an enthusiastic, creative and detail-oriented problem solver to help support the production, service and repair of our unique solid-state laser devices.

Must have expertise working with assembly and/or development of small, sensitive, high precision instruments, preferably solid-state laser technology, with a high caliber technology company.  We prefer design and hands-on experience in multiple laser technologies including solid state lasers, semiconductor lasers, non-linear optical materials and devices, optical benches, and beam directors. Experience with the technical aspects of developing laser and laser-based products is strongly preferred.

Candidates should have proven ability to address complex challenges with ingenuity and innovation, and capability to work independently to manage multiple simultaneous tasks, and see all tasks to completion. Also should have the ability to work well in a collaborative multidisciplinary team environment, define and analyze system performance specifications, and ensure adherence to those specifications in the application environment.

  • Perform sensitive manual optical assembly of lasers.
  • Test, troubleshoot repair and assemble lasers, subassemblies and various components, including high-voltage laser power supplies and other electronics.
  • Support the development and implementation of test fixtures, equipment, procedures and documentation for the engineering and operations functions.
  • Support product design and development activities related to new products and product improvements.
  • Support development and maintenance of quality and regulatory documents and procedures.
  • Provide customer technical support as needed including product service, maintenance, and troubleshooting.
  • With suppliers, act as a technical and operational liaison as needed.
  • Maintain thorough, complete and accurate written records; comply fully with the company’s quality system and any regulatory requirements.
  • Follow safety rules for working with high-voltages and high-power lasers.
  • Perform other duties as completion of responsibilities necessitates or as assigned by supervisor.
  1. Minimum 5 years of experience in an engineering role involving sensitive high precision instruments, preferably involving solid state lasers.
  2. Theoretical and practical knowledge and skills of adequate policies and procedures for the control of laser hazards and high voltage hazards, using relevant protective equipment, ensuring adequate safety education and training of other personnel.
  3. Understanding of system and component design, testing and troubleshooting.
  4. Enjoy working with your hands/mechanical ability.
  5. Strong analytical and problem solving skills.
  6. Proven technical and project management skills.
  7. Experience with manufacturing within a Quality Management System (especially medical).
  8. Strong interpersonal and communication skills.
  9. Self-motivated, detail oriented and well organized. Ability to make decisions and work independently Strong work ethic and desire to help the company successful by producing a reliable product.
  10. Not afraid to ask questions and make suggestions for improvement.
  11. Be able to work under pressure due to customer demands.
  12. Strong computer skills (Windows™ software).
  13. Ability to successfully manage multiple projects and daily responsibilities. Ability to discern and appropriately communicate sensitive issues.
  14. Ability to walk, stand, bend, reach, stoop/squat, and crouch. Ability to carry heavy items.
  15. Will require working indoors and outdoors – work environment includes the office, the production areas, mechanical rooms, and customer and supplier facilities. Also includes regular contact with high-voltage equipment and laser light emissions.

BS. in Physics, Mechanical or Optical Engineering, Master’s Degree preferred

  • We are a diverse team of friendly, creative hard-working people with a passion for achieving our objectives
  • We are creative, hands-on and innovative with a strong orientation toward high customer satisfaction 
  • We have created a very team-spirited company culture and believe it is important to have open and effective cross-functional collaboration and communications – and enjoy our work!

We’re looking for an enthusiastic, creative and detail-oriented problem solver to help support the production, service and repair of our unique solid-state laser devices.

Must have expertise working with assembly and/or development of small, sensitive, high precision instruments, preferably solid-state laser technology, with a high caliber technology company.  We prefer design and hands-on experience in multiple laser technologies including solid state lasers, semiconductor lasers, non-linear optical materials and devices, optical benches, and beam directors. Experience with the technical aspects of developing laser and laser-based products is strongly preferred.  

Candidates should have proven ability to address complex challenges with ingenuity and innovation, and capability to work independently to manage multiple simultaneous tasks, and see all tasks to completion. Also should have the ability to work well in a collaborative multidisciplinary team environment, define and analyze system performance specifications, and ensure adherence to those specifications in the application environment.

  • Perform sensitive manual optical assembly of lasers.
  • Test, troubleshoot repair and assemble lasers, subassemblies and various components, including high-voltage laser power supplies and other electronics.
  • Support the development and implementation of test fixtures, equipment, procedures and documentation for the engineering and operations functions.
  • Support product design and development activities related to new products and product improvements.
  • Support development and maintenance of quality and regulatory documents and procedures.
  • Provide customer technical support as needed including product service, maintenance, and troubleshooting.
  • With suppliers, act as a technical and operational liaison as needed.
  • Maintain thorough, complete and accurate written records; comply fully with the company’s quality system and any regulatory requirements.
  • Follow safety rules for working with high-voltages and high-power lasers.
  • Perform other duties as completion of responsibilities necessitates or as assigned by supervisor.
  1. Minimum 5 years of experience in an engineering role involving sensitive high precision instruments, preferably involving solid state lasers.
  2. Theoretical and practical knowledge and skills of adequate policies and procedures for the control of laser hazards and high voltage hazards, using relevant protective equipment, ensuring adequate safety education and training of other personnel.
  3. Understanding of system and component design, testing and troubleshooting.
  4. Enjoy working with your hands/mechanical ability.
  5. Strong analytical and problem solving skills.
  6. Proven technical and project management skills.
  7. Experience with manufacturing within a Quality Management System (especially medical).
  8. Strong interpersonal and communication skills.
  9. Self-motivated, detail oriented and well organized. Ability to make decisions and work independently Strong work ethic and desire to help the company successful by producing a reliable product.
  10. Not afraid to ask questions and make suggestions for improvement.
  11. Be able to work under pressure due to customer demands.
  12. Strong computer skills (Windows™ software).
  13. Ability to successfully manage multiple projects and daily responsibilities. Ability to discern and appropriately communicate sensitive issues.
  14. Ability to walk, stand, bend, reach, stoop/squat, and crouch. Ability to carry heavy items.
  15. Will require working indoors and outdoors – work environment includes the office, the production areas, mechanical rooms, and customer and supplier facilities. Also includes regular contact with high-voltage equipment and laser light emissions.

BS. in Physics, Mechanical or Optical Engineering, Master’s Degree preferred

Let’s Discuss Your Acne Strategy.

Start Delivering Excellence.

Hyperpigmentation

Photos Courtesy of Cheryl Burgess, MD.

Photos Courtesy of Jennifer Parker-Porter, MD.

Learn more about treating hyperpigmentation today.

Vascular Lesions

Photos Courtesy of Dr. Guilia Kasimova.

Photos Courtesy of Michael Gold, MD.

Learn more about treating vascular lesions today.

Rosacea / Redness

Photos Courtesy of Yelena Kipervas, DO.

Photos Courtesy of Dr. Nabil Fakih.

Learn more about treating rosacea and redness today.

Hair Removal

Photos Courtesy of Sholema Clinics.

Photos Courtesy of Steik Spa.

Learn more about treating hair removal today.

PFB

Photos Courtesy of Dr. Michelle Henry.

Photos Courtesy of Wendy Roberts, MD.

Learn more about treating PFB today.

Scars

Photos Courtesy of Dr. William Watfa.

Photos Courtesy of Bradley Bloom, MD.

Learn more about treating scars today.

Autoimmune Disorders

Photos Courtesy of Dr. Passeron.

Photos Courtesy of Dr. Sakhiya.

Learn more about treating autoimmune disorders today.

Skin Rejuvenation

Photos Courtesy of Catie Cutler, LE.

Photos Courtesy of Chesahna Kindred, MD.

Learn more about skin rejuvenation today.

Acne

Photos Courtesy of Michael Gold, MD.

Photos Courtesy of Michael Gold, MD.

Learn more about treating acne today.

Staff Accountant / Junior Accountant

Aerolase Corporation, a leading aesthetic laser innovator, seeks a Staff Accountant / Junior Accountant. Having made the Inc. 5000 list as one of the world’s fastest growing private companies as well as annual best-in-class product awards, Aerolase has transformed the market with products that provide uniquely tolerable treatments to the patients and exceptionally high ROI for the practitioners. The company offers competitive and an exciting high-growth company culture.

Duties:

• Provide support to the Controller and the management team
• Maintain day-to-day financial accounting functions, including A/P, A/R, expense tracking
• Support the month-end close process, ensuring accurate and timely monthly, quarterly, and year-end financial statements.
• Uploading annual budget and tracking actual to budget variances
• Use of financial reporting software
• Support external auditors and other required outside reporting requirements
• Participation in quarterly inventory reconciliations
• Assist team with projects such as policy creation, system implementation, client support etc.

• Some experience with and strong understanding of the monthly close process and technical accounting
• Detailed oriented, with ability to see the big picture
• Self-starter who can work independently and employ time management skills to meet deadlines.
• Knowledge of MS Excel (V-lookup, formulas, pivot tables).
• Strong interpersonal and communication skills
• Sound judgment and problem-solving skills

• Bachelor’s or master’s degree in Accounting a MUST, good understanding of GAAP
• 1-3 years’ experience in an accounting function (including internship)
• General Ledger/Operational Accounting experience
• Knowledge of Quickbooks or other reporting software a plus (more the better)
• Industry experience a plus

Senior Accountant

Aerolase Corporation, a leading aesthetic laser innovator, seeks a Senior Accountant. Having made the Inc. 5000 list as one of the world’s fastest growing private companies as well as annual best-in-class product awards, Aerolase has transformed the market with products that provide uniquely tolerable treatments to the patients and exceptionally high ROI for the practitioners. The company offers competitive and an exciting high-growth company culture.

Duties:

• Provide support to the Controller and the management team
• Own day-to-day financial accounting functions, including A/P, A/R, expense tracking
• Assist in establishing and maintaining policies & procedures in accordance with GAAP and Aerolase policy
• Key contributor to the month-end close process, ensuring accurate and timely monthly, quarterly, and year-end financial statements.
• Assist in the preparation of management reports – (cash management, various projections, month end reporting package)
• Involvement with the annual budget process
• Use of financial reporting software
• Support external auditors and other required outside reporting requirements
• Prepare and submit payroll
• Participation in quarterly inventory reconciliation to the perpetual
• Ad hoc projects

• Strong knowledge of the monthly close process and technical accounting

• Detailed oriented, with ability to see the big picture

• Experience in continuous improvement and accounting best practices

• Self-starter who can work independently and employ time management skills to meet deadlines.

• System savvy – ability to learn new financial software

• Intermediate knowledge of MS Excel (V-lookup, formulas, pivot tables).

• Global consolidations experience a plus

• Strong interpersonal and communication skills

• Sound judgment and problem-solving skills

• Bachelor’s or master’s degree in Accounting a MUST, good understanding of GAAP

• 3+ years’ experience working as a staff/senior accountant

• General Ledger/Operational Accounting experience a must

• Extensive knowledge of Quickbooks and other reporting software

• Prior involvement with system implementation

• Prior public accounting experience (any size firm) a plus

• Industry experience a plus

Login To View Our Content

NOTE: This is not the same login as the Aerolase portal.

Your username or email *
Your password

Register Now To View Our Content

This content is available only to members, who signed up for webinars. Submit the form below and we will grant you immediate access to the recordings.

If you experience any trouble signing up, please email: information@aerolase.com

Your name(Obligatorio)
Your Password(Obligatorio)

Request Your Aerolase Demo Today!

"*" señala los campos obligatorios